$383,888
Machine Location:4435 State Hwy 274Trinidad, Texas, USA 75163
Seller Information
View Seller InformationProvidence Equipment, LLC
Contact:Sales
Phone:+1 903-374-8361
Trinidad, Texas, USA 75163
General
Year
2005
Manufacturer
Model
Hours
3,000
Serial Number
CAT0246BAPAT03106
Condition
Used
Description
Machine Highlights
Year: 2005
Make: Caterpillar
Model: 246D3
OROPS
Standard Flow
Joystick Controls
Manual Coupler
Smooth Bucket
2 Speed
Hours: 3000
SN: CAT0246BAPAT03106
Engine
Gross Power - SAE J1995:2014 74.3 hp
Net Power - SAE 1349 72.9 hp
Displacement 203 in³
Stroke 4.7 in
Bore 3.7 in
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf
Engine Model Cat C3.3B DIT (turbo)
Net Power - ISO 9249 73.7 hp
Net Flywheel Power 72.9 hp
Operating Specifications
Rated Operating Capacity 2200 lb
Tipping Load 4400 lb
Breakout Force - Tilt Cylinder 7355 lb
Rated Operating Capacity with Optional Counterweight 2410 lb
Operating Weight 7478 lb
Service Refill Capacities
Chain Box - Each Side 3.3 gal (US)
Cooling System 3.7 gal (US)
Engine Crankcase 3 gal (US)
Fuel Tank 27.7 gal (US)
Hydraulic System 13.7 gal (US)
Hydraulic Tank 10.3 gal (US)
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gpm
Power Train
Travel Speed - Forward or Reverse - One Speed 7.7 mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11 mile/h
Dimensions
Wheel Base 49.2 in
Height - Top of Cab 83.1 in
Vehicle Width over Tires 66 in
Ground Clearance 8.9 in
Departure Angle 26°
Maximum Dump Angle 39°
Bumper Overhang - Behind Rear Axle 42.6 in
Rack Back Angle - Maximum Height 96°
Length - Without Bucket 117.8 in
Maximum Overall Height 158.7 in
Maximum Reach - With Arms Parallel to Ground 54.6 in
Length - With Bucket on Ground 146 in
Turning Radius from Center - Coupler 55.2 in
Bucket Pin Height - Carry Position 7.9 in
Bucket Pin Height - Maximum Lift 124.2 in
Clearance at Maximum Lift and Dump 97.1 in
Turning Radius from Center - Bucket 85.9 in
Turning Radius from Center - Machine Rear 71.2 in
Reach - Maximum Lift/Dump 23.6 in
2005 CATERPILLAR 246D3 OROPS STANDARD FLOW SKID STEER WITH JOYSTICK CONTROLS, MANUAL COUPLER, SMOOTH BUCKET, 2 SPEED, AND AN OPERATING WEIGHT OF 7,478LBS!
SE HABLA ESPAÑOL!
FINANCING AVAILABLE
PLEASE CALL US WITH ANY QUESTIONS!
ASK ABOUT OUR REASONABLE SHIPPING RATES!
Category Specific
Operating Capacity (50% of Tip)
997.9 kg
Operating Weight
3,391.96 kg
Tipping Load
1,995.81 kg
Standard Hydraulic Flow
87.06 lpm
Chassis
Ground Clearance
22.61 cm
Exterior
ROPS
Open
Powertrain
Two-Speed
Yes
Travel Speed
12.39 km/h
Travel Speed - 2-Speed Option
17.7 km/h
Weights & Dimensions
Length w/o Bucket
299.21 cm
Length with Bucket
370.84 cm
Height to Top of ROPS
403.1 cm
Width w/o bucket
167.64 cm
Engine
Horsepower
54.36 kw
Shipping Dimensions
Shipping Length
370.84 cm
Shipping Width
167.64 cm
Shipping Height
403.1 cm
Shipping Weight
3,391.96 kg